A sterntube-less ship features a shorter shaft with the prime mover further aft the vessel. Image courtesy Thordon Bearings
Thordon Bearings said ABS issued an Approval in Principle to the “sterntube-less ship” concept developed in cooperation with the Shanghai Merchant Ship Design & Research Institute (SDARI), the National Technical University of Athens (NTUA) and Thordon Bearings Inc.
The design replaces a vessel’s sterntube with an irregular shaped chamber that allows a shorter, water-lubricated propeller shaft to be inspected and maintained while the vessel is afloat, without having to withdraw the shaft in drydock. While the concept completely eliminates the need for oil-lubricated sterntube seals and bearings.
Anthony Hamilton, Technical Director, Thordon Bearings, said the concept revolutionizes the ships’ traditional sealed propeller shaft. “We started wondering why a vessel with a water-lubricated shaftline needs a sterntube. Why couldn’t the shaft simply run in the larger space outside the sterntube? This space is designed into virtually all vessels where an oil-lubricated sterntube is traditionally exposed to seawater for cooling. With a water-lubricated shaft this space still exists but it’s wasted space.”
Hamilton said the space could be used to access the shaft for inspections, and a lot of the shaft installation and operational challenges “completely disappear”.
A sterntube-less ship features a shorter shaft with the prime mover further aft the vessel. An additional bulkhead seal and a torsional vibration damper would be required but there is no aft seal and Thordon’s COMPAC seawater lubricated bearing replaces the oil-lubricated bearing aft.
“ABS and the Technical University of Athens have done the math and the engineering behind it. They’ve looked at system pressures, temperatures, loads, noise and vibration levels, shaft alignment – everything works,” said Hamilton.
The head of Lebanon's Hezbollah said on Thursday that his group could stop Israel from extracting gas from a maritime field…
A keel-laying ceremony was held earlier this week for Seaway 7’s new offshore wind turbine installation vessel Seaway Ventus.The…
Indonesian naval officers have asked for $375,000 to release a fuel tanker they detained last week, accusing it of anchoring…
Workers on Shell Plc's Prelude floating liquefied natural gas (FLNG) facility off Western Australia are set to begin 12 days…
Every year, many professional mariners become involved in accidents that trigger a USCG investigation.
Discover CFD software that functions as a virtual towing tank, highly automated and fully dedicated to marine design.
Military Sealift Command is hiring experienced mariners.
Subscribe for Maritime Reporter E-News
Maritime Reporter E-News is the maritime industry's largest circulation and most authoritative ENews Service, delivered to your Email five times per week
© 1996-2022 Maritime Activity Reports, Inc.